SOLD Kestros ZR inletted/bedded/RAD

[TylerFromMS]

For your consideration. I have 2 Kestros ZR that are both inletted and bedded (by Kelbly) for a right bolt right port short action F-Class Panda.

#1 has been shot quite a bit. The front crossmember was modified by me to give more barrel clearance. With a dremel. It ain’t pretty, but it’s functional. I have an extra rail and crossmember assembly (different style with delrin) that I can include for $100 extra for the buyer. Also included is a trigger guard. This stock was a test bed so there are 2 screw holes in the fore end that were filled in with JB Weld. It is ready for a RAD and will include the baseplate which is already shaped for the stock. This stock won a bunch in its current state with different Pandas in there. Adjustable cheek piece.
$1000

#2 is brand new, unfinished. Inletted and bedded. It will also include the trigger guard and is ready for a RAD and will include the baseplate which is already shaped for the stock. Cheek piece attached to stock.
$1600 SPF to @Rainbow1


Weights for both stocks are listed below.

They will be shipped priority mail and buyer will pay for insurance or other shipping method if requested. Personal check or discreet electronic payment is accepted- anything where I do not have to leave the house, basically.

If you need more pics or want to talk offline or whatever, let me know.

 

[TylerFromMS]

Price Drop

 

[daviddt]

I have a panda short action f-class right bolt , left port. What are we talking about for it to work ?

 

[TylerFromMS]

I have a panda short action f-class right bolt , left port. What are we talking about for it to work ?

No clue, not a stock guy. Probably a little dremel work on the left side- it may not be needed depending on the clearance.

 

[daviddt]

I will call kelblys tomorrow and get back with you , im sure this is not something that couldnt be worked out

 

[LVLAaron]

I have a panda short action f-class right bolt , left port. What are we talking about for it to work ?

You wouldn't HAVE to do anything. But you would want to match the port opening on the stock. Some careful work with some files can do the job.

Then use JB weld to fill in and file the existing port cut... The stock is already JB weld color, so it's an easy DIY job.

 

[daviddt]

You have a point , what would you have to have for one of them . I need to kick this around for a minute .

 

[TylerFromMS]

You have a point , what would you have to have for one of them . I need to kick this around for a minute .

You kick around too long and the price of the brick going to go up (The Wire reference)


Also- the crossmember I gave clearance to. And epoxied in. They will come loose. Again, not pretty but it’s under the barrel and it works. I’ve got a different version with delrin in the front listed in the original add at the top.

 

[TylerFromMS]

Drop.

 

[Steve h]

Can’t believe this is still here!

 

[ljmontano]

As long as shooters have dremel tools gunsmith will never go out of business! Lmao

 

[TylerFromMS]

Can’t believe this is still here!

They don't know about this stock, Steve.

Price drop.

 

[Steve h]

Got that right!!

 

[Superchunk]

I'll take it. Pm's.