SOLD Ken Light Wheel for 6.5 PRC or 300 WM

[DocBII]

Good day,

Looking for a wheel for the Ken Light annealing machine in 6.5 PRC. I can modify a 300 WM wheel to work, but would hate to repurpose one. Send PM with your requirements and address.

Thanks,
DocBII

 

[pdog2225]

Good day,

Looking for a wheel for the Ken Light annealing machine in 6.5 PRC. I can modify a 300 WM wheel to work, but would hate to repurpose one. Send PM with your requirements and address.

Thanks,
DocBII

Do a search on here for "Brian Crawford". He bought back the annealer business. I have the one called
BC 1000 (Brian Crawford 1000). His website is www.bkceng.com Good Luck pdog2225

 

[DocBII]

pdog2225,

I did a search using the name in quotes and didn't get a hit. Searching on the web for BC-1000 didn't turn up any more leads. I also tried to reach the website, but it appears to be down or non-functional. I'll try placing a phone call to some of the phone numbers on Monday.

Thanks for the help,
DocBII

 

[pdog2225]

pdog2225,

I did a search using the name in quotes and didn't get a hit. Searching on the web for BC-1000 didn't turn up any more leads. I also tried to reach the website, but it appears to be down or non-functional. I'll try placing a phone call to some of the phone numbers on Monday.

Thanks for the help,
DocBII

Try phone no. 928 221 3665. It was a good no. Last Oct,2020

 

[DocBII]

pdog2225,

That number is not good now. All the other phone numbers I found were the same number.

If someone has a #51 or a 300 WM wheel, I'll still purchase it.

Thanks,
DocBII

 

[Captainjohn]

I have the same phone number, but you might try and email him @ thecrawfords2@gmail.com
Good luck, the last job he did for me he said was going to be his last…

 

[DocBII]

Good day,

Wheel Size PDF contains the phone number and wheel size information from the CreateTech website. I spoke to the gentleman this afternoon, and they are still making and shipping annealing wheels. The email address is Team@CreateTech.biz, send them an email with your requirements. I think the cost of the wheels has increased.

HTH,
DocBII