prone.life
Silver $$ Contributor
- rings from benchrest gun; slight scuff around screw holes from installation/removal
{ Low rings SPF }
- these rings are $166+shipping new from Ken Farrell
- installed on rifle long enough to learn I need extra-high
- didn't figure this out until return window passed
{ High rings SPF }
Selling to fund taller Farrell rings
Not looking for a trade except for Ken Farrell Extra High (1.235") rings?
From kenfarrell.com...
Farrell Rings are precision CNC machined from a single piece of solid steel. They are a Picatinny system that mate with any 1913 Mil Spec Picatinny Mount. The ring cross bolt is concentric across the dovetail angles and pulls the ring down and over to the centerline of the base, creating even pressure. This enables the torque to be applied in such a way as to prevent stressing and moving the center line of the ring.
The clamp is designed to pivot on all surfaces to assure proper contact on the rail, the ring and the cross bolt. This is accomplished by using a radius on all points of contact. This is very important, especially when different rail manufacturers might have different dimensions across the 45 degree angles that all rings mount on.
Pics are current state.
Low Rings ( .0735" )
High Rings ( 1.035" )
Last edited:
