Kelblys scope ring question

[Phil]

For those of you that are using Kelblys rings with a Nightforce,with a 56mm obj. lense, and a HV taper barrel.........

What heigth(SP?) rings are you using??

I don`t want my scope sky high,but enough to clear the barrel....obviously

Thanks for your help,

Phil.

P.S....Bat B with Kelblys base

 

[WyleWD]

Phil, you might want to give serious consideration to calling Kelby's and asking them. I live close enough to them that I drove up there with the rifle & the same question you're asking. They just looked at it and brought out the correct size rings. Also, they knew that we'd have to bend the bolt to clear the power ring when I cycled the bolt on that particular set up.

Have your rifle ready so that they can ask questions about measurements, barrel Mfg, serial numbers. etc. They are GREAT folks to deal with. JMHO. WD

 

[GSPV]

I use extra high and have plenty of room. Just tell them what you're doing when you call them. For reference, here is a pic of the extra high with a NF and a HV profile barrel.

 

[billshehane]

Have in stock 2 different heights- with and without 20MOA Taper. Comes with Stainless screws and hex tops.
See at www.scopeusout.com --- click on custom rings on the menu on the left side of the page.
We sell the NF line so we know what fits.

Bill Shehane

D & B Supply
704-824-7511

 

[DCRYDER]

old style Kelbly in HIGH, or new style (detachable plates) standards work well with my 60mm Sightrons.