JAdkins87
Silver $$ Contributor
K&M Package I Do Not want to sale item by item Package deal. Only .. I am calling it lightly used.. Alot of it never got used.
2-Exspander Holders. 2 brass bushing 1 short 1 taller..
1-.17cal Exspander
1-.22cal Exspander
1- 6mm Exspander
1-.25cal Exspander
1-6.5mm Exspander
1-.270cal Exspander
1-7mm Exspander
1-.30cal Exspander
1-.32cal/.3235 Exspander
1-.35cal/.336 Exspander
1-.355/ Exspander
1-.38/.377 Exspander
1-.40/.408 Exspander
1-.40/.415 Exspander
1- 6mm to .30 cal Exspander
1-.337.5 Not Marked measured with my calibers.
1-.340 Not Marked measured with my calibers.
1-.367 Brass Not Marked measured with my calibers. The tip is Not round see pic.
1-.399 Brass Not Marked measured with my calibers. The tip is Not round see pic.
2- K&M Neck Turner's don't remember the angle of cutter's. I Believe standard .50 degree but don't hold me to it..
4- Handles
4- Power adapter's
1- Power adapter body and spring
1- #1 Shell Holder
1- #2 Shell Holder
1-Case Neck chaffer tool (tapered reamer)
1-Flash hole tool .221 at widest point. Hand held. Cutter can be replaced. It's good just pointing it out..
1-Flash hole tool .221 at widest point has K&M Black handle you can remove. Cutter can be replaced. It's good just pointing it out.
1-K&M Smll rifle primer pocket cutter Marked .122 and adjustable has been used on a few cases. Not the New 3in1
1-K&M Large pistol primer pocket cutter Marked .122 and adjustable hasn't been used. Not the New 3in1
1-K&M Large Rifle Primer cutter Marked
.13? Can't tell if it's a 1 or an 8 .. And it's adjustable and hasn't been used.Not the 3in1.
Neck Turning cutter pilots.
1-.17 cal cutter pilot Marked K&M 12/00 Not used the wax/rubber covering the tip came off so I wrapped it in heavy tape.
1-.22cal cutter pilot Marked K&M 4/01 Not used the wax/rubber covering the tip came off so I Wrapped it in heavy tape.
1-6mm cutter pilot Marked K&M 12/01 Not used the wax/rubber covering the tip came off so I wrapped it in heavy tape.
I don't remember but I believe all 3 cutters are carbide.
Neck Turning Mandrel's
2-.17 cal
2-.22 cal
3-6mm
2-6.5mm
2-7mm
1-.30cal
2-3D printed holders to keep track of all of it..
Now $650 Shipped $850 obo shipped If I am way off in Price let me know.. I looked up what I could and figured it at 70ish%
If you would like more pictures I can send them to you just ask if your really interested.
I have other mandrels and carbide Mandrels listed in my other post that fit the K&M body.
Located west of Cincinnati in Aurora,Indiana
Thank you for Looking...
God Bless
JDAS
2-Exspander Holders. 2 brass bushing 1 short 1 taller..
1-.17cal Exspander
1-.22cal Exspander
1- 6mm Exspander
1-.25cal Exspander
1-6.5mm Exspander
1-.270cal Exspander
1-7mm Exspander
1-.30cal Exspander
1-.32cal/.3235 Exspander
1-.35cal/.336 Exspander
1-.355/ Exspander
1-.38/.377 Exspander
1-.40/.408 Exspander
1-.40/.415 Exspander
1- 6mm to .30 cal Exspander
1-.337.5 Not Marked measured with my calibers.
1-.340 Not Marked measured with my calibers.
1-.367 Brass Not Marked measured with my calibers. The tip is Not round see pic.
1-.399 Brass Not Marked measured with my calibers. The tip is Not round see pic.
2- K&M Neck Turner's don't remember the angle of cutter's. I Believe standard .50 degree but don't hold me to it..
4- Handles
4- Power adapter's
1- Power adapter body and spring
1- #1 Shell Holder
1- #2 Shell Holder
1-Case Neck chaffer tool (tapered reamer)
1-Flash hole tool .221 at widest point. Hand held. Cutter can be replaced. It's good just pointing it out..
1-Flash hole tool .221 at widest point has K&M Black handle you can remove. Cutter can be replaced. It's good just pointing it out.
1-K&M Smll rifle primer pocket cutter Marked .122 and adjustable has been used on a few cases. Not the New 3in1
1-K&M Large pistol primer pocket cutter Marked .122 and adjustable hasn't been used. Not the New 3in1
1-K&M Large Rifle Primer cutter Marked
.13? Can't tell if it's a 1 or an 8 .. And it's adjustable and hasn't been used.Not the 3in1.
Neck Turning cutter pilots.
1-.17 cal cutter pilot Marked K&M 12/00 Not used the wax/rubber covering the tip came off so I wrapped it in heavy tape.
1-.22cal cutter pilot Marked K&M 4/01 Not used the wax/rubber covering the tip came off so I Wrapped it in heavy tape.
1-6mm cutter pilot Marked K&M 12/01 Not used the wax/rubber covering the tip came off so I wrapped it in heavy tape.
I don't remember but I believe all 3 cutters are carbide.
Neck Turning Mandrel's
2-.17 cal
2-.22 cal
3-6mm
2-6.5mm
2-7mm
1-.30cal
2-3D printed holders to keep track of all of it..
Now $650 Shipped $850 obo shipped If I am way off in Price let me know.. I looked up what I could and figured it at 70ish%
If you would like more pictures I can send them to you just ask if your really interested.
I have other mandrels and carbide Mandrels listed in my other post that fit the K&M body.
Located west of Cincinnati in Aurora,Indiana
Thank you for Looking...
God Bless
JDAS
Attachments
Last edited:
