• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

JGS Adjustable Reamer Stop

Non shouldered barrels??

Blasphemy !!

Just kidding. :)

Nice gauge. Especially like the knurling.
I don't do many Remage barrels but I do a lot for the Sig Cross. Their specs runs +/- .001" on HS. A rocking gage makes that difficult. $50 and a couple of hours work and now it's easy. W/O the knurling it would be a slippery little thing to hang on to with my fat fingers.
 
I don't do many Remage barrels but I do a lot for the Sig Cross. Their specs runs +/- .001" on HS. A rocking gage makes that difficult. $50 and a couple of hours work and now it's easy. W/O the knurling it would be a slippery little thing to hang on to with my fat fingers.

Which knurling tool do you use?
 
Mine started as an AXA self contained unit I paid $25 for on close out. That was more than a few years ago. I machined it to fit in a CXA toolholder. The best one I've ever used was a little Swiss unit. Unfortunately I popped one of the screws that held on one of the wheels. I may tackle making another one.
 
Is the one Dave linked a cut type?

I have a scissor I built from a kit, it’s pretty cool, and does a nice job on brass and aluminum, but struggles with anything harder than that.
 
Is the one Dave linked a cut type?

I have a scissor I built from a kit, it’s pretty cool, and does a nice job on brass and aluminum, but struggles with anything harder than that.
Go to Dorian's website. There's a lot of information there. I need to spend some time studying it.
 
I had Jasmine put me down for a reamer stop from their next batch. I can't make it for the $120 they want. Will only use it for throating.
 
What do you think of the micrometer head?
I've got a couple that I made into tools and I wasn't to impressed with how they felt or the consistency of the measurements, I ended up replacing them with Mitutoyo micrometer heads.
I will be interested in what you think of it.

I use those same ones on two other tools. Never had any issues.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,847
Messages
2,204,845
Members
79,174
Latest member
kit10n
Back
Top