• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Jewell Trigger Issue Resolved

Silent-2

The issue with my Jewell trigger on my REM700 F-TR rifle has been resolved. I completely disassembled it with the help of information provided on this forum. It was a very easy process. The PH1 bit fits the #2 screws perfectly. When I got the trigger apart it could clearly be seen that the firing pin block was dragging on the left housing plate at the upper rear corner. A picture is attached. I polished the inside of both plates to a mirror finish with Flitz. I also installed the "B" spring. I reassembled the trigger, installed it on the rifle and adjusted it to 8 ounces. It functions perfectly now. Thanks again to everyone on here that provided your expertise to get me up and running!

Semper Fidelis,

CAJewellDrag.jpgJewellDrag.jpg
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,238
Messages
2,213,993
Members
79,448
Latest member
tornado-technologies

Share This Page

Back
Top