WANTED Jewel trigger repair. Help.

[Rockhill Rifles]

I have a jewel trigger that one of the internals broke and fell out of the trigger. Is there anyone out there that has parts and can repair this trigger?

 

[RoyinNC]

Post a picture of the trigger and broken parts. Just a suggestion to get you some help.

 

[centerlineseal]

SELLING - Trigger Jobs for Rem 700

Hey Gents, I work on other triggers but specialize in Remington 700 Walker Style triggers. I can tune your trigger and then adjust to your desired pull weight down to as low a Safe 1 lb. pull weight. Safe means it will not go off if you slam the bolt closed. Most people don't understand the type...

forum.accurateshooter.com

 

[omega1]

I'm also searching for someone who can do repairs on Jewel triggers. I have two that went south after each went through a pierced primer event.

 

[R.Morehouse]

My only advice for anyone with broken Jewell triggers is to move on to another quality trigger that isn't out of business. I ran 3 Jewells, now run 2 Jewells and 1 Bix.......I do hope you can get some help with your Jewell.

Regards
Rick

 

[NDSU]

I had a stuck Jewel trigger after a pierced primer event. I was able to fix it myself. There’s a video on disassembly and reassembly on 6.5guys.com that is very helpful. There’s also step by step pics.

 

[Deleted member fkimble@charter.net]

Doesn't sound like it's just jammed since a broken piece fell out. He at best needs a new part that he can install!

Frank

 

[LCazador]

Sounds like reset lever broke. This usually happens with a blanked primer. Buy a new trigger and sell the one you have for parts if that's possible. It someone could manufacture that part it would be a boon to Jewell owners!

 

[joe139]

Soon as that happens to mine I'm going to buy a Bix & Andy

 

[rjs1230]

Flavio fare is the way to go . Hard to find though. Had mine for five years several thousand rounds and not one problem .

 

[John1945]

Try asking over on Rimfire Accuracy. Might be a bad one over there someone might part with.

 

[FNSafari]

Problem isn't the repair, its finding the parts to repair.

 

[David Conder]

I might buy if you decide to sale thanks