is there a BRX version of the PPC case??

[Ogre6br]

Hi
Is there a BRX,short neck/shoulder blown foward) concept/version of the PPC case, that can be loaded with standard PPC dies like the BRX can be with standard BR dies??


How is the BRX style chamber created using a standard reamer or does the neck of the reamer have to be modified??

Looking to get a few extra grain powder capacity from the PPC case without having to step up to the BR case or needing new dies by going to a 40Deg shoulder-no case taper,ackley improved) style of case on the PPC brass.
Wanting more velocity for varmint loads with 58-70 varmint projectiles.

Thanks heaps
later
P

 

[MarkS]

I shoot a 6BRX. The chamber is cut with a 6BRX reamer, not a 6BR pushed in deeper.

A few of my freinds a shooting a 6 Grendel and a 22 Grendel, for 600 yd IBS Benchrest. It is made from the 6.5 Grendel brass. it is a imp length PPC. There is info on this Site.

Mark Schronce

 

[waterdog]

There is a website with the info you are looking for.. It is
www.6mmar.com This round is made using 6.5 Grendel brass and it shoots great whatever you call it, 6mmAR or 6mm Grendel.

I used one in the 600yd match this past Saturday at Piedmont in light class and came in second with a 2.38 agg behind Terry Brady who is hard to ever beat. Load info;;CCI-450 primer, a mild load of R-15 behind a Berger 105gr. VLD seated about .010 into the lands.

That website has all the info you will need.
Larry Isenhour

 

[WayneShaw]

Go over to benchrest central, and look up Dick Grosbier, and send him a PM. He can put you in touch with someone that had great success with what you're looking for.