Integral scope rail question

[tirednlost]

Hey everyone I have an action with an integrated scope rail. It’s a 0 MOA and I’m wanting to gain some elevation. Without running shim style rings, does anyone know if it’s possible to mill or machine any elevation into the rail? Or any other ideas? Thanks for your time

 

[Sniper338]

Sale it and buy one with 30moa built in

Put a 30moa picitinny rail on top of the integrated rail.

Buy a 30 moa american rifle company one- piece rail and rings. I forget what its called, but they are QUALITY. I have two. Level is built in too.


Always good to just buy an action with it built in when integrated if you need it or not imo never has hurt for me.

 

[rebelyell]

If it's a machined in picatinny rail, then you can't machine any elevation into what's there. You're left to find either a cantilever mount or a set of rings that you can shim.

 

[tirednlost]

Sale it and buy one with 30moa built in

Put a 30moa picitinny rail on top of the integrated rail.

Buy a 30 moa american rifle company one- piece rail and rings. I forget what its called, but they are QUALITY. I have two. Level is built in too.
View attachment 1185976

Always good to just buy an action with it built in when integrated if you need it or not imo never has hurt for me.

that ring set up looks pretty solid! And doesn’t seem like it sets you up to high. Might be the way I go. Thanks.

 

[Fast14riot]

Burris signature rings

 

[Sniper338]

that ring set up looks pretty solid! And doesn’t seem like it sets you up to high. Might be the way I go. Thanks.

Its VERY solid and QUALITY. I use their rings on all my guns. Top notch, never had an issue. I curently just moved and dont have any gun stuff here otherwise I would post pictures. They are some of the best rings money can buy.

The one piece rings are "made" for ARs but they work just fine on rifles too. Im running a eliseo chassis 284 win custom build with the one piece rings. Had em on defiance deviant actions, rem 700 actions, bordens, I've used em a ton. Use a torque wrench, they tighten very well, leave no marks on scopes, but over tighten easily..

 

[tmwinds]

Is your integrated rail a picatinny or dovetail rail? If it is a dovetail you can buy a 20 or 30 moa picatinny that will slide on and clamp to the dovetail. I got mine from Kelbly. In my opinion you can't go wrong with Burris Signature rings if you decide to go that route.

 

[paperpuncher]

Another potential solution
https://www.badgerordnance.com/riser-rail-22-moa.html

 

[Dusty Stevens]

I think @Field & Cave has or can make what you want. Great company to deal with