Identify scope rings ??

[Jeff3680]

Can anyone help identify this set of 30mm steel scope rings ? They are apx 1.4" to centerline. No marks or stamps , look to be quality built .

 

[mudduck]

Nightforce ?

 

[muleystalker]

They might be the ones Euro Optics have outsourced with the Night force specs, an agreement they have with NF, all aluminum, no Ti clamp or cross bolt.

 

[wkdickinson]

+1 NightForce

 

[Jeff3680]

These rings are 100% steel .... Thanks for the input guys ...

 

[coldboreshot]

Can anyone help identify this set of 30mm steel scope rings ? They are apx 1.4" to centerline. No marks or stamps , look to be quality built .

Leupold Mark 4's

 

[Drop Port]

Leupold Mark 4's

+1
Definitely not NF

 

[DOGCAPPER]

They are CC rings. Cheap Chinese.

 

[jds holler]

xtra tall. jd

 

[Drop Port]

Just compared them to an old set of M-4's I have and the only visible difference is yours have a radius cut on the non clamping side of the ring where it meets the pic rail. Mine are cut like a v same as the edge of the pic rail.

Did M-4's make them both ways? knock offs? don't know

 

[Jeff3680]

Thanks for the imput guys . Rings came on a Leupold Vari-x III 8.5x25 that I bought but are to high for my setup. Was looking to sell them but without a maker I hate to . Doesn't look like a Chinese knock off but never sure . The screws are quality , clamp nut is 1/2, not metric ..

 

[Jeff3680]

My son just sent me a pic , think this answered my question ..

 

[coldboreshot]

Thanks for the imput guys . Rings came on a Leupold Vari-x III 8.5x25 that I bought but are to high for my setup. Was looking to sell them but without a maker I hate to . Doesn't look like a Chinese knock off but never sure . The screws are quality , clamp nut is 1/2, not metric ..

I'm willing to bet that a reasonable deduction would be...the individual who took the time and money to purchase a Leopold VIII, took the additional time and money to purchase quality rings for said scope. Never heard of copies in circulation but if so, they would most likely be aluminum copies.