Ideal replacement triggers for a Tikka build.

[loud_noise]

Hi everyone
I'm am building up a PSR/F-open rifle from a Tikka action in .260Rem and I'm at the point of working out what to do with the trigger. I am playing with the factory trigger, which is currently installed, in terms of reducing pull weight and seeing how that runs at different settings.

I was interested to know if anyone could recommend an aftermarket trigger that has served them well on a Tikka build or if there are particular makes/models/brands that stand out for use on Tikka rifles.

Thanks in advance everyone

 

[wvlongshot]

Jard.

 

[jsthntn247]

Get a 10$ spring from Yodave and it will be all you need for prs type shooting

 

[TikkaSporter]

Get a 10$ spring from Yodave and it will be all you need for prs type shooting

^^^^^ That...

My Tikka 595/Sako 995 stock triggers are the best triggers I own, with no after market springs or anything. The Tikka breaks at 1lb 2oz and the Sako at 1lb 4oz, both are very crisp with NO creep whatsoever.

 

[Jason Boersma]

Bix and Andy makes a trigger for Tikka, it's the best

 

[Ares]

The Bix'n Andy is the highest quality trigger you can get for a T3, they're incredibly consistent and crisp and it's a perfect trigger for a F-open rifle.
The previous generation CG trigger (21) also fits the T3 and is a high quality two stage trigger for a target rifle.
You can also use Sako TRG triggers for it, again a good two stage trigger witch i prefer over the original triggers.

Or you can as mentioned get some trigger springs for the original and see how you like it, witch is a very economical solution.

There are also a few other options who i have not found all that impressive compared to a tuned factory trigger.

 

[mikegaiz]

wotks on TRG's and Sako's with center post safety.

http://www.barnard.co.nz/barnard-tikka-trigger

 

[loud_noise]

Thanks very much everyone, there are some great ideas. I'm thinking I will adjust settings in my factory trigger but I'm going to see what is left in the budget after my new barrel is installed and see what that gets me. If I have a reasonable budget surplus and they are available in Australia I will look seriously at the Bix 'n' Andy offering. Looking at the website and product offering they seem impressive.

 

[J P Brown]

Barnard has a trigger for the tikka

 

[kris4ocean]

First step is to get a better spring for the stock trigger and your're OK for start. Bix'n Andy is proper trigger pornography but more appropriate for F class and benchrest than PRS. I am getting CG32 trigger which also fits Tikka. Tried CG on other guns and they are very nice.