I'm going to buy a Bix'n Andy TacSport Pro. Before I do so, I need to know which Top Sear to purchase.
Based upon the instructions here:
I've removed the stock trigger from my Factory Rem 700. If I'm doing this right, I'm measuring the distance between the 2 red circles objects?
I've ended up with measurements of about .153" which would make sense, as the table here says the Rem 700 they measured is about .157".
Looks like I need a Low sear. Has anybody run their systems into the Yellow? I'd rather not buy parts I don't need, but I certainly don't want to cause damage or have problems.
Based upon the instructions here:
I've removed the stock trigger from my Factory Rem 700. If I'm doing this right, I'm measuring the distance between the 2 red circles objects?
I've ended up with measurements of about .153" which would make sense, as the table here says the Rem 700 they measured is about .157".
Looks like I need a Low sear. Has anybody run their systems into the Yellow? I'd rather not buy parts I don't need, but I certainly don't want to cause damage or have problems.
