Background:
I've been studying and reading up on the 30-338 Lapua Magnum and I am interested in making a switch barrel for my Savage 338 Lapua Magnum, chambered in this 30-338 Lapua Magnum caliber.
I have sourced a reamer, gunsmith, barrel, ballistics and load info, pretty much everything, and then turned my attention toward making brass for it. The idea being making sure my ducks are in a row before pulling the trigger on this build.
In an article written several years ago,(10 years, to be exact)
Reference:
http://www.6mmbr.com/thirty338.html
Rich Franklin references a "Hornady 30 Caliber neck sizer. This die has a large cavity so that many different size cases can be necked down from 338 to 30 caliber."
I have been successful sourcing information on all the other specialty tools for this, however, I have been unsuccessful in my internet searching for this tool. Does anyone have any help or advice, maybe a part number?
Thanks!
I've been studying and reading up on the 30-338 Lapua Magnum and I am interested in making a switch barrel for my Savage 338 Lapua Magnum, chambered in this 30-338 Lapua Magnum caliber.
I have sourced a reamer, gunsmith, barrel, ballistics and load info, pretty much everything, and then turned my attention toward making brass for it. The idea being making sure my ducks are in a row before pulling the trigger on this build.
In an article written several years ago,(10 years, to be exact)
Reference:
http://www.6mmbr.com/thirty338.html
Rich Franklin references a "Hornady 30 Caliber neck sizer. This die has a large cavity so that many different size cases can be necked down from 338 to 30 caliber."
I have been successful sourcing information on all the other specialty tools for this, however, I have been unsuccessful in my internet searching for this tool. Does anyone have any help or advice, maybe a part number?
Thanks!