Help with .260 AI gas gun and RE-17

[Gr8Horses2003]

Can someone please give me a starting load for RE-17 for a .260 AI gas gun? 22in barrel w/ +2 gas tube and SLR adj. gas block. Will be using 123gr. Scenars in Lapua Brass and WLR primers. I've looked all over, but most of the loads seem to be for bolt guns.

Thanks in advance.

 

[watercam]

Use the same starting load (if none is listed, roughly 5 grains. below max), they are safely low enough. Work it up in .5 increments - my bet is you will end up just above the mid point between start and max. Watch where your brass is going.

 

[Gr8Horses2003]

Thanks for your advice. I appreciate the help.