Help needed, 7 PCRW Seating Die?

[Dan-Schenk]

I need to know which Seating Die to order for the 7 PCRW. I’m running a little thin on cash, but I have everything else for it already. I do not have an arbor press either, so I would be using it in a standard Rockchucker.

 

[Ranger188]

@Alex Wheeler

 

[stymie12000]

I have forster micrometer 7-08 seater that I opened the sleeve up for 7-6.5. Used my finish reamer. Works fantastic.

I maybe selling it soon. I will be replacing it with the SAC modular seating die since I am also building a 300prc.

 

[Dan-Schenk]

I have forster micrometer 7-08 seater that I opened the sleeve up for 7-6.5. Used my finish reamer. Works fantastic.

I maybe selling it soon. I will be replacing it with the SAC modular seating die since I am also building a 300prc.

That would be awesome! I bought the SAC sizing die, but I’m getting low on funds for this project.

 

[Alex Wheeler]

A wilson blank reamed with the chamber reamer is the best. Save up for an arbor press. Its worth it.

 

[Dan-Schenk]

A wilson blank reamed with the chamber reamer is the best. Save up for an arbor press. Its worth it.

That’s in the works, probably another 6 months though.

 

[L.Sherm]

Like Alex stated once you start using an Arbor press i doudt you will go back, there's alot of benefits especially going to the range doing a seating depth test.

 

[Alex Wheeler]

That’s in the works, probably another 6 months though.

An arbor press is not an area you need to spend a lot. A cheap one works fine.

 

[LVLAaron]

got my arbor press right here

 

[L.Sherm]

got my arbor press right here

View attachment 1489298

While crude it does work. LOL

 

[LVLAaron]

Hear me out guys....

 

[Sandstorm]

I think you may be pulling our leg here my brother…

 

[LVLAaron]

Honestly, the can crusher would probably work fine! Low profile! wall mount!

 

[EdHarley]

Honestly, the can crusher would probably work fine! Low profile! wall mount!

That is funny. Just drill a hole for the ogive.
On a more serious note, do you recommend an arbor press with a pressure gauge or go by feel for those using them?

 

[One Eye Pete]

Call LE Wilson direct, they will make you a up a special, a 6.5 PRC inline seater necked up for the 7mm bullets. The price is very reasonable and when I ordered mine the delivery wasn't bad. I highly recommend the micrometer version.

 

[Bullwinklelol]

got my arbor press right here

View attachment 1489298

That is a swing press

 

[stymie12000]

Forster 7-08 with sleeve reamed to 7-6.5.