Help buying parts for a K&M neck turner

[Never Forget]

I'm going to place my order today but am confused on what shell holder to order with my K&M neck turning tool. I spoke to someone at Grafs a couple weeks ago and I thought he said the shell holder retainer does not use standard shell holders, he said you have to use the ones for the Lee zip trim. He also said he never used the K&M tool. The K&M website doesn't say exactly which shell holder style either that I found.

Can someone please tell me what shell holder I need to use? I'm cutting necks for a 6.5 x 47, do I have several shell holders that go in my RCBS loading press, am I already set with those?

Thanks, John

 

[dkhunt14]

It uses the flat ones from Lee. Like the primer seated uses. They are flat on the bottom and don't have that shoulder below. They are Lee Autoprime. Matt

 

[Never Forget]

It uses the flat ones from Lee. Like the primer seated uses. They are flat on the bottom and don't have that shoulder below. They are Lee Autoprime. Matt

Thank you.

 

[Willie]

It uses the flat ones from Lee. Like the primer seated uses. They are flat on the bottom and don't have that shoulder below. They are Lee Autoprime. Matt

PreZachly right. I don't know if it was intended when they used the Lee shell holders, but even with my arthritic paws, I have not had a problem tightening by hand. Never had a case loosen, while using the power adapter.