Harrell's sizing die

[ttfreestyle]

I just received a Harrell's bushing full length sizing die. Should there be any movement ( rattle) of the bushing once it's in and the top is tightened if I shake the die or should the bushing be snug as this one is ( no rattle)? It doesn't have the adjustable top like my Redding type s dies have which I usually back off a bit. Thanks for any replys.

 

[jimcasey01]

I thought they typically had very slight movement.

 

[Kyle Schultz]

I was told no slop.

 

[LRPV]

Mine all rattle.

 

[Gabe22BR]

Necks got to center in the bushing somehow....

 

[ttfreestyle]

I tried 3 different bushings and none rattle, they do use standard Redding bushing correct?

 

[ttfreestyle]

Necks got to center in the bushing somehow....

This is my concern.

 

[djporter]

This is my concern.

I always install a 1/2"X 1/32" O-ring so they will rattle!

 

[ttfreestyle]

""It doesn't have the adjustable top like my Redding type s dies have which I usually back off a bit." """" HOW DO YOU CHANGE THE BUSHING SIZE ??

The top is removable but not adjustable.

 

[Tim Singleton]

I just don't tighten it down leave it a little loose

 

[JimPag]

The bushing is suppose to have a little play in it when tightened.

 

[22DASHER]

I shimmed mine to create a little rattle. They came with no rattle.

 

[LRPV]

I have 3 Dashers and a BR. The bushing rattles in all of them.

 

[Richard Jones]

Mine rattle with Wilson bushings.

 

[Delfuego]

Should I get the same rattle with Whidden dies too? I just got my first set of those and am curious.

 

[Terry O]

Should I get the same rattle with Whidden dies too? I just got my first set of those and am curious.

My Widden bushing dies are adjustable. You can create as must bushing play, amount of neck sized as you want. The Herrell dies I have have a slight rattle with CRT bushings.

 

[Delfuego]

Thanks Terry. I knew about the Harrell's "rattle" from a friend, but didn't have any on my Whidden's. I read this thread and started to worry...

 

[ttfreestyle]

I Called Harrell's today, they confirmed there should be " rattle "
With Redding bushings so the neck and bushing can align. They asked me to return it so they can check it out, I expected nothing less as they are great people to deal with. Thanks for all the replys. Troy

 

[tmwinds]

I just received a Harrell's bushing full length sizing die. Should there be any movement ( rattle) of the bushing once it's in and the top is tightened if I shake the die or should the bushing be snug as this one is ( no rattle)? It doesn't have the adjustable top like my Redding type s dies have which I usually back off a bit. Thanks for any replys.

Mine didn't rattle until I replaced the batteries in my hearing aids.

 

[ttfreestyle]

Mine didn't rattle until I replaced the batteries in my hearing aids.

Lol funny