SOLD Hall standard action 6PPC barrel 20.5" long Schneider 14 tw

[Shooter13]

This barrel has less than 200 rounds, sold the gun. Not sure what Hall action it is for so be sure before you buy. Tenon is 11/16 long and 1" x 16 TPI 14 twist (old fashion method).
$200 or best offer shipped.
.262 neck
If you want to talk about it PM me for my phone #
Thanks!

 

[Keith Hansley in NC]

looks like a Speedy job from days of old

 

[wlaursen]

Do you know what the barrel twist is?
Wally

 

[Shooter13]

Do you know what the barrel twist is?
Wally

14

 

[Shooter13]

TTT

 

[Shooter13]

TTT

 

[Shooter13]

Talked with Mr. Hall and he stated that this was for the standard action, not the M or larger.

 

[spike-55]

Yes, and every one of Alan's guns were hand made. So it's more than a crap shoot if any parts will interchange (most won't), I have several Hall's M's, B's, G, E, etc. GREAT actions - but not one of the bolts will even fit in the raceway of the same model lol!!!! However it's not a problem these old beast's just keep pounding them out!!! If you are changing barrels on a Hall, you likely will run into a slight headspace issue that is not usually an issue. You can have someone fix it by facing a little off the shoulder and check the tenon length if it's too short and if it's a tad long (usually less than ten thou) - Just fireform your brass like a PPC or Dasher and set your dies and you're good to go!!!!!
stan