H4895 and 75 gr V-Max?

[Crusader]

Does anyone shoot this combination in their 6BR? I'd like to try it, but can't find any load data on it. Neither Hodgdon or Hornady seem to have it published. If any of you can give me minimum and maximum data as well as your preferred load, I'd really appreciate it.

Thanks.

 

[blinky]

tried it with a 70gr matchking.loaded 32.5grs h4895,lapua brass,benchrest primers.Got load from nosler6 handbook.Had some vertical stringing out of my savage.

 

[dr549]

Shot 30.0gr of H4895 with a Nosler 70grBT and Lapua brass necked to .266. Got a nice 1/4 group at 100yds in a Savage with a 1-12 TW and same with a Cooper M22 with a 1-14TW. Mild and accurate load with no pressure signs.

 

[ehkempf]

My Rem. 700 with it's Hart 6BR barrel (.272 nk and a 1-12 twist) likes 30.5 g of H4895 and the 75 g V-Max.

Ed

 

[Bidgee]

Have a look here http://www.adi-limited.com/handloaders-guide/ ADI is an Aussie company than manufactures some of the Hodgdon powders. 4895 is eqivalent to what we call AR2206H in Aus. If you look up 6mm BR Rem (they dont list Norma) you will see some loads for 2206H.

 

[jefats]

ADI has a nice website and data pages. I see they refer to Benchmark 1 and Benchmark 2. Does anyone know if these are the same as Hodgdons Benchmark powder?

Thanks