• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Good load for 65 grain Sierra SPBT

I've had a bunch of these for several years and decided to load some, I'm running them in a 8 twist 18" AR.
I have Varget, 4895, H-335 several different VV powders and others.
Suggestions will be appreciated.
 
I've seen very good accuracy in a couple of Colt ARs (1 in 7") and a CZ bolt action (1 in 9") using the 65 GK and H4895 powder. TAC is good but not quite as accurate though it does go through a measure better. I have not used Varget, but it would be worth a try. With regard to Varget in general - I've tried it in a number of cartridges and have developed some accurate loads, but I've seen slightly better overall results with H4895.
 
  • Like
Reactions: K22
In My rifle, a 16" AR, I use 25.4 grains of Varget under the 65 SGK. This gave me good accuracy and power to put down the does for the freezer. Just be sure to start low and work up to this load, every rifle is different.
 
Viht N133 starting load at 22 grains. My rifle likes 23.5 grains but start lower to find your best groups and work up.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,309
Messages
2,216,279
Members
79,555
Latest member
GerSteve
Back
Top