alf
Silver $$ Contributor
After gobs of consideration, I've come to the conclusion that it's time to get out, quit, retire, & stop shooting competitively, so I'm putting my long range gun and gear up for sale. Everything to set you up for long range shooting except the ammo.
Built by some of the best out there, from top tier components.
Bat Model M polished dual port, right bolt, left port, right eject, with the sliding plate ejector for BR sized cases.
28" heavy varmint Krieger .236" 8" twist chambered in a .269" necked 6 Dasher.
This is a new & unfired barrel chambered by Jerry Simison.
The stock is a McMillan ST-1000 pattern in a grey to whitish fade gelcoat with a polished aluminum buttpad.
The action was block bedded into this stock by Tom Meridieth, of TM Stock Works fame.
The trigger guard is a bead blasted aluminum single screw variety.
Trigger is the desirable Jewell BR model.
The scope is a Nightforce BR 12-42x56 Benchrest model with the DD reticle.
The scope is mounted in Kelbly polished 30mm rings.
The scope base is a polished custom from Bat, somewhere around 40-50 MOA, I forget exactly.
The scope is basically centered at 1K, which is what I wanted when I had it built.
The front rest is made by Sinclair. It was their first version of a windage rest that was only offered for a couple of years.
The 3" front bag is a Protektor.
The rear bag is also a Protektor, a flat top Doctor bag filled with heavy sand.
Also includes a Bat port side action wrench.
Lastly, a Pelican 1750 Travel Vault, with the foam cut to match the gun.
Package deal for the whole shebang is $6995.00.
Perfect for someone wanting to get into LR shooting, & over whelmed looking into the equipment hole, & wants instant gratification with quality parts.
I'm in SW Wisconsin, and can travel a reasonable distance to meet if needed.
Built by some of the best out there, from top tier components.
Bat Model M polished dual port, right bolt, left port, right eject, with the sliding plate ejector for BR sized cases.
28" heavy varmint Krieger .236" 8" twist chambered in a .269" necked 6 Dasher.
This is a new & unfired barrel chambered by Jerry Simison.
The stock is a McMillan ST-1000 pattern in a grey to whitish fade gelcoat with a polished aluminum buttpad.
The action was block bedded into this stock by Tom Meridieth, of TM Stock Works fame.
The trigger guard is a bead blasted aluminum single screw variety.
Trigger is the desirable Jewell BR model.
The scope is a Nightforce BR 12-42x56 Benchrest model with the DD reticle.
The scope is mounted in Kelbly polished 30mm rings.
The scope base is a polished custom from Bat, somewhere around 40-50 MOA, I forget exactly.
The scope is basically centered at 1K, which is what I wanted when I had it built.
The front rest is made by Sinclair. It was their first version of a windage rest that was only offered for a couple of years.
The 3" front bag is a Protektor.
The rear bag is also a Protektor, a flat top Doctor bag filled with heavy sand.
Also includes a Bat port side action wrench.
Lastly, a Pelican 1750 Travel Vault, with the foam cut to match the gun.
Package deal for the whole shebang is $6995.00.
Perfect for someone wanting to get into LR shooting, & over whelmed looking into the equipment hole, & wants instant gratification with quality parts.
I'm in SW Wisconsin, and can travel a reasonable distance to meet if needed.
Last edited:
