Front rests

[Barlow]

What front rest would you guys recommend that will do a good job but won't break the bank. F class open Savage 12FTR. Thanks Barlow

 

[tiny68]

One of ShadeTree's tops paired with an old cast iron base. I have the got the F/Class base with mine but I prefer something heavier on the bottom. I usually use my base from my Caldwell BR. If you want a stick rest, I think it is the best of the lower end rest.

http://shadetreeea.com/products.htm

Luck, Tim

 

[Bowhunter4]

I would just get something within your budget , whatever buy purchase will work just fine to get you started.If you find that you enjoy shooting matches you will probably want to upgrade in the future.Their are a lot of joy stick users and their are a lot of wheel users take you pick.

 

[gaboon]

Caldwell br rest will get you started.

 

[Barlow]

I have been competing for the past 5 years with our local group of 10 or so if they all show up. I have been using a cheap Hoppe's rest that I weight down with sandbags. Have gotten some PM's that are helpful. Barlow

 

[savageshooter86]

Bald Eagle seems to be a good option. Or the Sinclair Heavy Varmint. I am too looking at getting a rest for this rifle. Are you using a track plate on the forend?

 

[Joe C]

Call Bob "The Viper" Pastor...you won't be sad...

 

[Barlow]

Bald Eagle seems to be a good option. Or the Sinclair Heavy Varmint. I am too looking at getting a rest for this rifle. Are you using a track plate on the forend?

No I am not. Barlow

 

[savageshooter86]

I shot mine today off a Sinclair HV model(older version) and it tracked very well today for me. Using a Whidden tracker plate installed on the rail. All I had to do was make very fine windage adjustment(this model has windage top) and I was ready to fire.

I was shooting a 308 win

 

[Nodak7mm]

Call Bob "The Viper" Pastor...you won't be sad...

YA.. What Joe said. I have twice and have two more in the wotks for my daughters rests. Powder coat to reflect the personalities.. A true custom by a true artist with metal...

Rod