----FOUND---- .900 x 32 tpi Barrel Tuner

[Taterracing7575]

I recently purchased a used Panda barrel from Speedy and it has the older Ezell tuner threads (.900 x 32 tpi) on the muzzle. I have 2 newer Ezell tuners with .875 threads on rifles currently.
Does anyone have any leads for a tuner with .900 x 32 tpi I can purchase? I will also be posting a wanted ad in the classified section. Any help is greatly appreciated.

Thanks, Michael

 

[wvlongshot]

A guy that shoots ubr with us had some of ezell's older ones for sale awhile back. I'll ck with him.

 

[Taterracing7575]

A guy that shoots ubr with us had some of ezell's older ones for sale awhile back. I'll ck with him.

Thanks Scott

 

[gunsandgunsmithing]

The .900 has been discontinued for about 10 years now but you might consider machining the barrel for one of the .875 tuners you already have. It'll clean up. Probably cheaper than buying a different tuner and you won't need to deal with it again in the future.--Mike

 

[Taterracing7575]

The .900 has been discontinued for about 10 years now but you might consider machining the barrel for one of the .875 tuners you already have. It'll clean up. Probably cheaper than buying a different tuner and you won't need to deal with it again in the future.--Mike

Thanks Mike, I think I have one located but if it falls through I may go your route.
Thanks again, Michael

 

[joshb]

I have an old tuner I bought and never installed. It might be what you need. I’ll go see if I can find it.
Josh

 

[joshb]

OK! Found it in the first drawer! I amazed myself!
The inside is .8690-5 ish between the tips of the threads. It’s the first tuner I ever bought and it was so long ago, I can’t remember what I paid or who made it. I’m guessing it’s the .875 thread you already have? I don’t know. The threads look deeper than 3 thousandths.

 

[Taterracing7575]

OK! Found it in the first drawer! I amazed myself!
The inside is .8690-5 ish between the tips of the threads. It’s the first tuner I ever bought and it was so long ago, I can’t remember what I paid or who made it. I’m guessing it’s the .875 thread you already have? I don’t know. The threads look deeper than 3 thousandths.
View attachment 1743166View attachment 1743167View attachment 1743168View attachment 1743169

Sending you a DM

 

[butchlambert]

OK! Found it in the first drawer! I amazed myself!
The inside is .8690-5 ish between the tips of the threads. It’s the first tuner I ever bought and it was so long ago, I can’t remember what I paid or who made it. I’m guessing it’s the .875 thread you already have? I don’t know. The threads look deeper than 3 thousandths.
View attachment 1743166View attachment 1743167View attachment 1743168View attachment 1743169

Josh, one of my Shadetree tuners. Pretty sure it is .900x32.

 

[butchlambert]

Shadetree Barrel Tuner Manual » Shadetree Engineering & Accuracy

shadetreeea.com

 

[joshb]

Josh, one of my Shadetree tuners. Pretty sure it is .900x32.

Thanks Butch! It’s of such quality, I should have known you had a hand on it.
To the OP Michael: If you want it, I’ll offer a deal. Upgrade to a gold membership and it’s yours. Oh, and you have to send me your address.
Josh

 

[Taterracing7575]

Thanks everyone I have found a tuner.