• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Forster Datum dial question

tac284

Gold $$ Contributor
Looking for someone who owns one and a measurement. Can you measure for me to the best of your ability the hole diameters of the bullet dials. Calipers will work but if you have some minus pin gages that would be great. What I’m looking for is how close they relate to bore/groove diameters.

Mainly need 6mm, 6,5 & 7mm holes measured.

Thanks
 
.243 Cal = .233"

.257 cal = .247"

.277 cal = .267"

w/ callipers. All are 10 thou less than their nameplate.

But ping Forster the question.
 
Last edited:

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,582
Messages
2,198,724
Members
78,989
Latest member
Yellowhammer
Back
Top