My 30-284 ai reamer set from Manson is up for sale. Includes finish reamer, resizer reamer, and 284win ack go gauge.
It's only cut 1 barrel and die, in great shape. The resizer reamer has a ding in 1 flute from the smith fumbling it, doesn't affect the finish at all, see picture for location.
The barrel I have chambered with it is super accurate. The cartridge is awesome, but want to move back to something that is less expensive and doesn't require fire forming.
It shoots 185 jugs extremely well, and is throated just about perfectly for them. The boat tail junction sits just above the donut area and jumps 0.020-0.040 depending on where you seat.
I recently sent the reamers to Manson to have them measured due to some brass sizing issues. It ended up being that my sizing die was cut a little oversized and likely my chamber too. Ray at Manson reamers measured all the dimensions of my reamers and they were all in spec, except the body of the resizer was a little bit by 0.0005 or so, so they fixed that. Everything is now spot on. I can provide the measurements Ray gave me if wanted.
See attached prints and reamer pics.
Reamer set w headspace gauge is $400 shipped in continental US, venmo, PayPal FF, or check or money order
Also, If interested, I also have a sizing die, seating die, cortina precision expander die body, some brass (about 4 boxes Peterson and 1 box Lapua in various stages of life), and mullerworks #3 24" Tikka barrel w ~600 rounds on it that I'd sell. I think I'd like $450-500 for these items, but we'd have to discuss the specifics if you're interested.
I'll sell all of it to you for $800 shipped.
It's only cut 1 barrel and die, in great shape. The resizer reamer has a ding in 1 flute from the smith fumbling it, doesn't affect the finish at all, see picture for location.
The barrel I have chambered with it is super accurate. The cartridge is awesome, but want to move back to something that is less expensive and doesn't require fire forming.
It shoots 185 jugs extremely well, and is throated just about perfectly for them. The boat tail junction sits just above the donut area and jumps 0.020-0.040 depending on where you seat.
I recently sent the reamers to Manson to have them measured due to some brass sizing issues. It ended up being that my sizing die was cut a little oversized and likely my chamber too. Ray at Manson reamers measured all the dimensions of my reamers and they were all in spec, except the body of the resizer was a little bit by 0.0005 or so, so they fixed that. Everything is now spot on. I can provide the measurements Ray gave me if wanted.
See attached prints and reamer pics.
Reamer set w headspace gauge is $400 shipped in continental US, venmo, PayPal FF, or check or money order
Also, If interested, I also have a sizing die, seating die, cortina precision expander die body, some brass (about 4 boxes Peterson and 1 box Lapua in various stages of life), and mullerworks #3 24" Tikka barrel w ~600 rounds on it that I'd sell. I think I'd like $450-500 for these items, but we'd have to discuss the specifics if you're interested.
I'll sell all of it to you for $800 shipped.
