Flat Trigger guards

[David Brooks Rifle Stocks]

Does anyone know where i canfind a trigger guard that is Flat/Parallel from base to to actual guard? difficult to explain, but most, if not all, sloped down towards the back of guard. Below is a BAT that is the flatest of all that i have found, but still abouty an .080"-.090" drop as best i can measure.

 

[AlNyhus]

The BAT's are the flattest I've found. Do you need a flat one for finger clearance or....? -Al

 

[David Brooks Rifle Stocks]

Need flat to gain clearance for trigger shoe. Some actions sit deeper in the stock, and rather than trim the shoe, whould like to find a flat guard. I had one but do not know the manufactuer

 

[tac284]

Hope you don’t need it to look good…..

Atlasworxs Trigger Guard – Remington 700 ADL ( Silver ) – Atlasworxs

atlasworxs.com

 

[David Brooks Rifle Stocks]

Well.............It is taller and flat'ish. I may get one or two to see what it looks like on the stock. I gues better than trimming shoe, ...Maybe!

 

[GenePoole]

Chad DIxon at LRI makes these. He may be willing to do a custom if his off-the-shelf stuff won't work for you.

LRI Trigger Guard

LRI single-shot trigger guards are available with hole spacing for a variety of receivers. If you don't see a guard with the required hole spacing, call us and place your order over the phone. It's very easy for us to adapt to your needs. The outer frame of the guard is machined with a 2-1/2*...

www.longriflesinc.com

 

[AlNyhus]

David, the reason I ask is that I use some PTG trigger guards....they're deeper. I also flip them around.

Trigger is a standard length Jewell for reference:

Remington 700 ADL Trigger Guard - Black Anodized Aluminum - Pacific Tool and Gauge

Remington 700 ADL Trigger Guard - Black Anodized Aluminum at Pacific Tool and Gauge

pacifictoolandgauge.com

 

[David Brooks Rifle Stocks]

Thanks to both of you, i got one of each coming to see if those work. I have some designs drown up in Fusion 360 for a flat style that is not rounded on ends, just waiting for machine shop to quote making them

 

[AlNyhus]

Thanks to both of you, i got one of each coming to see if those work. I have some designs drown up in Fusion 360 for a flat style that is not rounded on ends, just waiting for machine shop to quote making them

If they're going to be for sale, let me know when you get them. I end-for-end them as my 3rd. finger won't fully close due to some teenaged 'activities'.

Good shootin' -Al