F-Class dryfire targets

[Amazingrandy]

Hey Everyone,

Could someone point me in the direction of printable F-Class targets for dryfiring? I thought I had seen something on here in the past, but cant seem to find what I thought I saw. A midrange version would be ideal, but im sure I could use a long range version if thats all there was. Thanks!

 

[Eagle Six]

Would something like this help...

Reduced F Class

 

[Amazingrandy]

Would something like this help...

Reduced F Class

Im not sure. I can always print them out and give it a try. Thanks

 

[Eagle Six]

Another idea is to grab a screen shot of the web of a 1K F Class target and scale it to your dry fire distance. Any graphics program can zoom in/out to enlarge or reduce the image. It would take a little math to calculate what the 10 ring size would be for your dry fire distance and then size and print a few to get the correct proportional corresponding rings. Does that make scene? I know what I mean not sure I explained it well.

 

[Rank Amateur]

Hey Everyone,

Could someone point me in the direction of printable F-Class targets for dryfiring? I thought I had seen something on here in the past, but cant seem to find what I thought I saw. A midrange version would be ideal, but im sure I could use a long range version if thats all there was. Thanks!

What range will you be practicing at? You indicated midrange, but what is your ideal target (MR-65F, other)?

 

[Amazingrandy]

What range will you be practicing at? You indicated midrange, but what is your ideal target (MR-65F, other)?

600 yard midrange

 

[Rank Amateur]

Find attached a PDF. This is an accurate representation of an NRA MR-65 with an MR-65FCA F-Class target center as designated for 500yd NRA F-Class matches. The PDF at 100% scaling is the 500yd target scaled down for 100yd practice (outside of the white ring around the 5 ring measures 6 inches). This file can be printed for targets at essentially any mid-range by changing the print scaling. I.E., if you print this file at 600% scale, it will be the accurate representation of the NRA 600yd target. Of course, the larger the print scale, the more pixelated the lines will become. If you really need this to print large with better resolution, let me know and I'll post a version with more resolution (much larger file). The 100yd version prints inside an 8.5 x 11" sheet, while a 200% print will just cut off the 5 and 6 rings on the same letter-sized page.

Hope you guys find this useful...

 

[Rank Amateur]

Hope you guys find this useful...

Had a little extra time so put together a vector graphics version. Same guidance: print at 100% scale for a 100yd target, 200% for 200yd, etc. This should produce crisp printed lines.

 

[Rank Amateur]

Aaaaaannnd, because I have no life (grin), here is a vector graphics representation of the NRA LR + LR-FC target (800 to 1000yd F-Class target), scaled for 100 yds. Again, scale for your practice range (100% = 100yd, 200% = 200yd, etc.)