Different uses with hBN

[JRS]

I have been experimenting with different uses with my Boron by taking advantage of the great lubricating qualities. I applied it to the mandrel on one of my neck turners and turned 30 6BR cases without additional lubrication. I have also charged the cases with powder leaving the coating on the inside of the necks. The powder flows without sticking to the necks. Applied it to the rams on my presses 3 months ago and have found it is great at repelling grit and dust. As of yet, I have found nothing that sticks to anything I've coated with the hBN.

 

[jo191145]

Don't forget to lube the bolts on your rifles. Slick and dry is nice.

 

[anyrange]

I cleaned and wipe hBN on the drum of my Redding BR3 powder measure.

 

[spclark]

Last time I cleaned the firing pin & spring on my T2k, I used hBN powder to lube it before reassembly.

Collects a lot less dirt & grit under dusty conditions than anything else I'd tried before.