hi guy looking for some answers about lapua brass i am going to REAMER the flash hole on my new lapua brass Do you need to DEBURR inside of thr case as well
deburring 6mmbr
- Thread starter shaunharkin
- Start date
Forum Boss
Administrator
Do a visual inspection of the brass. Some lots have a thin sliver or obstruction in the flash hole. You can usually punch that out with a small-diam drill bit held in a pin vise.
If the brass looks OK visually you can probably leave the flash holes alone. I wouldn't ream them larger than .0625. Be aware that some of the flash hole reamers on the market have bits that will ream to .067 or larger.
If the brass looks OK visually you can probably leave the flash holes alone. I wouldn't ream them larger than .0625. Be aware that some of the flash hole reamers on the market have bits that will ream to .067 or larger.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.