Data 68 powder

[butchlambert]

Acquired an 8lb jug of Accurate Data68. Any body have any experience with it in a 6ppc or 30br? I've had it for several years and have never broke the seal.

 

[Rdlningcltchdmpr]

Have you looked at (Accurate ) load data. Online ? They have load data for the 6ppc. Also. Other cartridges. I just googled data 68 powder and it popped up instantly. I just tried Alliant 1200r in my 30 Ar cartridge / 112 Bib bullet. It is very good indeed.

 

[rsmithsr50]

butch, is the label intact ?
see the lot12-03 acc556 ?
hot lot of 556 powder by about 10%
I have used in 223's up to 75 gr bullets,
but not the 2 you asked about( and I have both)

 

[JAlfred]

Faster than advertised and temp sensitive. Can deliver good accuracy in 223. Check and see if yours is a mixture of ball and extruded looking grains. I still have 24 lbs.

Wrong, I must have gotten rid of a jug. I only have about 18 lbs left. Only "lot" markings I see are:

12/03
6 10 06

 

[GrocMax]

http://www.accuratepowder.com/wp-content/uploads/2011/04/DP68.pdf

Includes two bullets tested in 6PPC

 

[rsmithsr50]

commercial ppc, not a benchrest ppc. look at the pressure. not even starting pressure in a br ppc.

but thanks

http://www.accuratepowder.com/wp-content/uploads/2011/04/DP68.pdf

Includes two bullets tested in 6PPC

 

[GrocMax]

I figured an experienced reloader (such as Mr. Lambert) can interpolate whether its appropriate powder or not just based on that scant page of data.

 

[butchlambert]

butch, is the label intact ?
see the lot12-03 acc556 ?
hot lot of 556 powder by about 10%
I have used in 223's up to 75 gr bullets,
but not the 2 you asked about( and I have both)

Mine is lot 12-03 acc556
Since I've had it several years I'll play with it after I get low on my H322, LT30&32, 8208, VV133, and others.
Thanks

 

[rsmithsr50]

mine sits in about the same line...lol the price was right when purchased.