dasher neck diameter ?

[Hal]

It seems like .270 is a standard neck diameter for the NO TURN Dasher. Is there a standard or most popular neck diameter for those that want to turn the necks on the Dasher using the new blue box Laupa brass.

I did a search but never realy turned up much,I know it's there somewhere.


Hal

 

[Phil]

Hal,

You need to get some brass and turn it until you get the necks as cleaned up as you like.

Measure the neck and go for it...

I`d imagine at .011 you would have 100% clean up .011+.011+.243=.265 so .267 will work.

I`m still using my gold box brass so this is just a guess as to how much clean up you`ll have at .011,my gold box cleans up 100% at .012 so my necks are .267 with a .269 chamber.

 

[Blaster-37]

Hal,

You need to get some brass and turn it until you get the necks as cleaned up as you like.

Measure the neck and go for it...

I`d imagine at .011 you would have 100% clean up .011+.011+.243=.265 so .267 will work.

I`m still using my gold box brass so this is just a guess as to how much clean up you`ll have at .011,my gold box cleans up 100% at .012 so my necks are .267 with a .269 chamber.

Same here. Gold box, 267 in a 269.

 

[Hal]

Thanks for the replies.

Measuring cases the thinest measured .0115.

I'll have to turn a few cases and see what they measure with a bullet seated.

Thank you

Hal

 

[Alex Wheeler]

I have .268 and .269 necks. I recommend the 268. I shoot hybrids and they measure .2436'' I turn to .0112''. All the necks clean up 100% using blue box.