SELLING Custom knives

Good afternoon! I have been making knives for a bit over a year and have several for sale. These are both 4 3/4” blade with a very slight recurve. The black handled one has a tapered tang and the handles are stippled g10, blade is blued 80CRV2- $350. The brown/orange handled one is vintage Bakelite with an acid etched 80CRV2 blade- $300.

I have several other models that I make as well including hunting knives, filet knives, bushcraft and camping knives and kitchen knives. If you’re interested in a custom made knife please PM me.

Thanks for looking!
Mason Ostrom
Ostrom Iron Works
 

Attachments

  • 64E6EDD2-632C-451B-B8CA-CC98A4EB3315.jpeg
    64E6EDD2-632C-451B-B8CA-CC98A4EB3315.jpeg
    388.7 KB · Views: 321
  • IMG_3339.jpeg
    IMG_3339.jpeg
    322.7 KB · Views: 311
  • IMG_3340.jpeg
    IMG_3340.jpeg
    310.6 KB · Views: 289
  • IMG_3210.jpeg
    IMG_3210.jpeg
    1.1 MB · Views: 292
  • IMG_3212.jpeg
    IMG_3212.jpeg
    1 MB · Views: 315
Here are few examples of other knives I have made. A couple of hunting knives, a skinner and a big camp/ bushcraft knife.
 

Attachments

  • IMG_3268.jpeg
    IMG_3268.jpeg
    206.1 KB · Views: 142
  • IMG_3272.jpeg
    IMG_3272.jpeg
    175.9 KB · Views: 144
  • IMG_3298.jpeg
    IMG_3298.jpeg
    408.9 KB · Views: 145
  • E1BE0FDD-DDB1-4637-A7BA-84B432BA1D04.jpeg
    E1BE0FDD-DDB1-4637-A7BA-84B432BA1D04.jpeg
    669.3 KB · Views: 143
Here’s a slip joint pocket knife I just finished up. This one is spoken for but I have more in the works.
 

Attachments

  • IMG_3430.jpeg
    IMG_3430.jpeg
    922.5 KB · Views: 61
  • IMG_3432.jpeg
    IMG_3432.jpeg
    836.4 KB · Views: 59
  • IMG_3433.jpeg
    IMG_3433.jpeg
    937.2 KB · Views: 61
  • IMG_3431.jpeg
    IMG_3431.jpeg
    927.8 KB · Views: 58
  • IMG_3434.jpeg
    IMG_3434.jpeg
    808.5 KB · Views: 63
Last edited:
Another knife available. This is my “Rainier” model. It’s a 6” blade, 5/32” thick 80CRV2 steel. I did a tapered tang on it and a hand sanded satin finish. Handles are burgundy canvas micarta with white and black g10 liner and a stabilized Burl spacer. Includes a kydex sheath. Price is $450 shipped within the USA.
 

Attachments

  • IMG_3628.jpeg
    IMG_3628.jpeg
    1.2 MB · Views: 36
  • IMG_3627.jpeg
    IMG_3627.jpeg
    810.4 KB · Views: 35
  • IMG_3626.jpeg
    IMG_3626.jpeg
    1.1 MB · Views: 35
Those are impressive grinds for only a year.
Care to elaborate about your heat treat? What rc are these?

Nice looking blades
 
Thank for your compliments. Heat treat is done in a thermocouple controlled heat treat oven. For these 80CRV2 blades they are austenitized at 1600 degrees then quenched in Parks 50 oil. Tempered 2x 2hrs at 350 degrees. HRC is tested with hardness files right now and is right around 58-60 HRC.
 
Bumping this back up. I’ll be exhibiting at the Oregon Knife Collectors show in Eugene in April if you’re in the area.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,012
Messages
2,187,723
Members
78,620
Latest member
Halfdeadhunter
Back
Top