Custom bullet

[rafale]

I need an advice concerning a custom 103/105 grs (vapor trail or Barts bullets)? The barrel is a Krieger 6mm 4 grooves 1/8 bore 237. 32".This bullet must be easy on seating depth and capable of great accuracy at 3150/3200 f/s .

Thanks in advance,

Michel

 

[DennisH]

Yes it is. What exactly are you wanting to know?

 

[rafale]

Yes it is. What exactly are you wanting to know?

I just need a good advice to choice between the two brands.I think they are both great but like a said,the bullet must be easy on seating depth
and highly accurate of course.

Michel

 

[JFrank]

There are three other custom Bullet makers as well

 

[cf]

as always look at what the top 10 are shooting in the matches and try them in your barrel. not all barrels are the same,i can tell you that your 2 choices would be my starting point ,in that exact order . cody finch

 

[PAPA65]

ANYONE HAVE SPARE BARTS 105 6MM BULLETS.I WANT TO TRY SOME BEFORE BUYING LARGER QUANTITY

 

[JRS]

I just need a good advice to choice between the two brands.I think they are both great but like a said,the bullet must be easy on seating depth
and highly accurate of course.

Michel

Only you can make that decision. Try both and use the brand that your barrel likes.

 

[Falfan2017]

Call Bart he sent me a sample pack of a hundred or so of a few of his different products.

 

[rafale]

Call Bart he sent me a sample pack of a hundred or so of a few of his different products.

Good idea but I lived in France.

 

[JFrank]

Good idea but I lived in France.

Lapua Senars

 

[DennisH]

I just need a good advice to choice between the two brands.I think they are both great but like a said,the bullet must be easy on seating depth
and highly accurate of course.

Michel

The BIB's were consistent, easy to dial in, and pretty accurate. I tried JLK 105' with great results, Berger 108's, SMK',s John Hoover tuned smk 107's, and a few more.

This is a target picture of my 6br. I also have a BRX, DASHER, and a 6.0x47 Lapua. The bullets below work in all of my 6mm", and very well.

First is BIB's. Great bullet IMO, and as someone mentioned, all barrels shoot a little different, but I am sure anyone can dial in a load for almost any 6mm.

2nd was JLKs 105's, and Berger 108s was right in there. Any of these bullets should work just fine. The 6br, BRX, & DASHER were super easy dialing in.

NOTE: The "red circle" target dot is about the size of a #2 pencil eraser.

 

[rafale]

Lapua Senars

I know the 105 L work very well but I want something different.

 

[DennisH]

I know the 105 L work very well but I want something different.

BIB's or Bart's!

 

[DennisH]

ANYONE HAVE SPARE BARTS 105 6MM BULLETS.I WANT TO TRY SOME BEFORE BUYING LARGER QUANTITY

About where r located?

I have some?

 

[PAPA65]

I AM IN TENNESSEE

 

[DennisH]

PAPA65, PM sent, Dennis