• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Cortina Tuner

I ordered a Cortina tuner for my Dasher. When I bought the rifle used it came with 2 barrels, the barrel that was on it had 3/4-24 threads. I swapped barrels to the other one and figured it was the same thread pitch as the other but it's not its 3/4-28. Erik doesn't offer an adapter for 3/4-28 threads just 24 so I need an adapter to be able to use what he offers which would be 5/8-24.

So.... I need a reducer to go from 3/4-28 to 5/8-24 so I can use the tuner. Any recommendations on where to get one or a machinists that can make what I need?
 
I need a reducer to go from 3/4-28 to 5/8-24 so I can use the tuner. Any recommendations on where to get one or a machinists that can make what I need?

Isn't that what this is?
 
Isn't that what this is?
Do you see a 3/4-28 offered?
 
One of my custom rifles was threaded 3/4 x 32 as well. I had a local friend of mine make a 3/4 X 32 female adapter so I could use the E C Tuner/Brake @ 5/8-24 male. He was very meticulous and polished it down to the exact diameter of my barrel.
This is what I need I really don't care if it's the exact Dia just that it works
 
Hello Sir,

If you will PM me the length of the 3/4-28 threaded portion of your barrel and the depth of the 5/8-24 tuner threaded portion and your name and address I will make you an adapter and mail it to you.

jaclthr

P.S. Please give me the outside diameter of your barrel so I can try to match it .
 
Last edited:
Hello Sir,

If you will PM me the length of the 3/4-28 threaded portion of your barrel and the depth of the 5/8-24 tuner threaded portion and your name and address I will make you an adapter and mail it to you.

jaclthr

P.S. Please give me the outside diameter of your barrel so I can try to match it .
Sending you a PM! Thank you
 
Hello Sir,

If you will PM me the length of the 3/4-28 threaded portion of your barrel and the depth of the 5/8-24 tuner threaded portion and your name and address I will make you an adapter and mail it to you.

jaclthr

P.S. Please give me the outside diameter of your barrel so I can try to match it .
Maybe the South IS gonna rise again!
Mighty nice of you to step up to the plate!!!
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,081
Messages
2,189,615
Members
78,688
Latest member
C120
Back
Top