Cartridge box

[usftr]

Does anyone have a source for .338LM and .30-.378Wby ammo box? OAL is 4.1" for Wby and the boxes marked for those cartridges are too short.

 

[Johnny_V]

Does anyone have a source for .338LM and .30-.378Wby ammo box? OAL is 4.1" for Wby and those boxes marked for those cartridges are too short.

I have 3, but unfortunately they are for 300 ultra. I did see though that the boxes are made by Berry's.

 

[usftr]

Those only go to 3.80" OAL. I need taller.

 

[gotcha]

Does anyone have a source for .338LM and .30-.378Wby ammo box? OAL is 4.1" for Wby and the boxes marked for those cartridges are too short.

Go to MTM case-guard site and check out the R-100 box. .......... I don't shoot cartridges as LOOOOng as yours but depth of my R-100's is comfortably more than 4.1"

 

[usftr]

Thanks! R100Mag may work.

 

[gotcha]

Thanks! R100Mag may work.

They have that dreaded plastic hinge but some of mine are 25+ yrs. old and still tote ammo well. Note that the internal ammo grid can be flipped upside down for different ammo configurations. I use the R-100 for much smaller (6BR) cartridges etc. and use a square of plastic foam in the lid to keep brass or bullets from spilling if dropped. Hope it works for U

 

[Brians356]

You could drill holes in the lid to let the bullets poke through. Just sayin' ...
-

 

[284winner]

You could drill holes in the lid to let the bullets poke through. Just sayin' ...
-

Love the redneck ingenuity !!!

 

[Brians356]

Love the redneck ingenuity !!!

They can breathe easier, too.
-

 

[gotcha]

You could drill holes in the lid to let the bullets poke through. Just sayin' ...
-

Then when its rainin' or you don't need the holes you can cover with duct tape. ...... lern't that from my uncle in Yazoo city, Mississippi

 

[MagnumManiac]

I run MTM H-50 Deluxe XL-XX for my 416 Rigby and 505 Gibbs, plenty of room for 338 Lapua and 30-378, in fact, I just tried a 30-378 in mine, heaps of room.

Cheers.

 

[usftr]

I have a MTM R100Mag and two H50XL on the way (one for .338LM and one for .30-.378Wby). Looks like the H50XL will cover it. Thank you all that replied! I had overlooked them all in my search.