Can someone list these powders from the coolest burning to the hottest???

[Raptor]

I am trying to figure out which is the "Coolest" burning powder of the ones I have on hand. Thanks guys!!!

I have HV100, H4831SC, H1000, H4350, IMR7828SC

 

[Twoboxer]

https://www.hodgdon.com/PDF/Burn Rates - 2015-2016.pdf

 

[savagedasher]

I am trying to figure out which is the "Coolest" burning powder of the ones I have on hand. Thanks guys!!!

I have HV100, H4831SC, H1000, H4350, IMR7828SC

Powders are done by burn rate not by temperature. Larry

 

[dmoran]

H1000 - 3630-kJ/kg
H4831SC - 3870-kJ/kg
IMR7828SC - 3950-kJ/kg
H4350 - 3990-kJ/kg

Sorry, I don't have the "heat of explosion" data for HV100
Donovan

 

[ShootDots]

If you have not bought powder as of yet. The C-O-O-L-E-S-T burning powder of ANY powder, is VV N165. It is right between IMR 7828 and H1000 on the burn rate chart. So, if you are looking for COOL and want a powder in the same range as those listed, get VV N165!

 

[Ggmac]

Your question of cool is a relative , confusing term . The length of time that the barrel is subject to is just as important , also as you see from above , the temp is weight related , so if you need x # of grains of a hot faster powder versus a x+ of a slower cooler powder nothing can be gained . You obviously have an over ore cartridge so shoot what is the most accurate and think of barrels as tires on your car . You replace them or get a new car . Just my .02

 

[Raptor]

Thanks Guys. dmoran and shootdots knew what I was looking for and answered my question. I know the burn rates, that is why I asked to try and find out about the powders that burn "Cooler" or that would be easier on barrels. I had heard that HV100 was as "Cool" burning as H1000 but could not remember where I had read that so thought some of you guys might know.. Appreciate the replies and if anyone knows where HV100 falls in the list would appreciate a update even though I haven't found anything that it really shoots well in. Thank again guys!!

 

[Nvreloader]

Raptor,

HV100 is 3545-kj-kg

Tia,
Don

H1000 - 3630-kJ/kg
H4831SC - 3870-kJ/kg
IMR7828SC - 3950-kJ/kg
H4350 - 3990-kJ/kg

Sorry, I don't have the "heat of explosion" data for HV100
Donovan

 

[Raptor]

Raptor,

HV100 is 3545-kj-kg

Tia,
Don

Thanks!!!! Appreciate the update.

 

[Iowa Fox]

Where do you guys find the heat of explosion rates? I'm curious where H4895 falls in.

 

[hogan]

Another Good Reason to own a Loading Manual....

 

[dmoran]

..

Where do you guys find the heat of explosion rates? I'm curious where H4895 falls in.

H4895 - 3830-kJ/kg

.

 

[StevenDzupin]

I am trying to figure out which is the "Coolest" burning powder of the ones I have on hand. Thanks guys!!!

I have HV100, H4831SC, H1000, H4350, IMR7828SC

http://www.accurateshooter.com/technical-articles/excel-formula-predicts-useful-barrel-life/

 

[Eddie Harren]

Where do you guys find the heat of explosion rates? I'm curious where H4895 falls in.

Ask "savagedasher".

 

[kyreloader]

Does someone have a list of the heat of expansion rates? I opened the excel sheet, but I am unable to hover/move over to see other powders to get the numbers?