burris signature zee ring

[huntall]

Does anyone know where to buy a torx cross bolt for the burris signature zee ring?
thanks huntall

 

[savageboy]

I have several that I can send to you. Send a SASE to me. Send me an IM and I will send my address

 

[k80skeet]

I would like to know where you got them from. I sure could use a couple of sets. Thanks Russ

 

[k80skeet]

Where can I buy a coupe of sets????

 

[Dallas Jack]

I went to Fastenal and ordered some hex head replacements for the crossbolt. Does anyone know what to torque them to? Thanks in advance.
Dallas Jack

 

[Nodak7mm]

Dallas Jack,

Do a google on std tq values for the applicable grade of bolt it is and the size, should find a table for that online. If not there are alot of hardware reference documents out there and Fastenal should actually have something. But pretty sure google will cough up something..

nodak

 

[Dallas Jack]

A google search led me to several tables. All called for 12.1-12.7 in lbs for the 6-40 in stainless. This seems a little light. I think I will go with at least 20 in lbs. Can always change it later if need be.
Dallas Jack

 

[johara1]

The best thing to do is drill out the hole to the tap size for a 10-32. then drill one side for a clearance hole and tap the other but it only works for a picatinny rail. then get 10-32 cap screws to fit. works better than that little screw. with the 10-32 i torque to 65 in. lbs..........jim