Broken Duplin Bipod, cant get any help

[Crackerbacks]

Last week I was at the range and went to tighten the cant on my bipod and the plastic lever broke. I have called Clint (duplin) twice and he will not return my calls, does anyone know where else I might find one? I checked all my local hardware stores with no help.

It seems to have a large torx fitting on the inside.

thanks

 

[savagedasher]

Try super glue . Larry

 

[Crackerbacks]

No way I am going to trust superglue, my luck it will snap again in the middle of a match.

I assume you are just joking

 

[savagedasher]

No way I am going to trust superglue, my luck it will snap again in the middle of a match.

I assume you are just joking

Wasn't I would've tried it junk any way .
Larry

 

[Dos XX]

Try Sinclair. I think they sell those bipods.

 

[Crackerbacks]

Try Sinclair. I think they sell those bipods.

nothing.

I don't even know what it would be called to google it, I have been looking for hours. $350 paper weight at this point

 

[TonyR]

One of these might do the trick if you know the thread size:
http://www.mcmaster.com/#control-handles/=q5ltlf

 

[Crackerbacks]

One of these might do the trick if you know the thread size:
http://www.mcmaster.com/#control-handles/=q5ltlf

it doesn't thread, it looks like a torx head inside

 

[rmist]

^^^^ God to hardware store and use their thread checker to find the thread size. I know Ace has them locally. Not sure bout the big stores. Or use the nuts to find right size.

 

[Crackerbacks]

One of these might do the trick if you know the thread size:
http://www.mcmaster.com/#control-handles/=q5ltlf

I took it farther apart and found out what I needed, thank you!

 

[vmcdonald]

Does the lever have a feature that allows you to pull back on it and freely rotate it without loosening the screw inside? If so, Harris makes a lever that does that called a pod lock. It may work but you will probably need a longer screw

 

[savageshooter86]

Wow. Looks like a death grip was applied to tighten that. Doesn't take much to lock it in place

Try calling them Monday. I never had issue contacting when I ordered mine.