BRASS INSERT FOR CHARGEMASTER

[jotrot]

I just got a new chargemaster lite and was wanting to pick up that insert but cant recall were to purchase it.

Thanks, Joel

 

[Adam in WI]

Pm @MDM

 

[The boogalorian]

Use a Mc Donalds straw. works great. Costs nothing.

 

[mike a]

I just got a new chargemaster lite and was wanting to pick up that insert but cant recall were to purchase it.

Thanks, Joel

Let me know when the beep , beep is about to push you over the edge. I can help. Mike

 

[Big Mc]

I just got a new chargemaster lite and was wanting to pick up that insert but cant recall were to purchase it.

Thanks, Joel

Go to any auto parts store and get a brass fitting for a 5/16 flue line. very cheap. you will never need anything else. Tommy Mc..

 

[Live2Ride]

EBay item number: 254277662142

 

[divingin]

Go to any auto parts store and get a brass fitting for a 5 1/16 flue line. very cheap. you will never need anything else. Tommy Mc..

Did you by chance mean 5/16" Seems to me that 5-1/16" would be a tad oversize.

 

[Big Mc]

Did you by chance mean 5/16" Seems to me that 5-1/16" would be a tad oversize.

Yes Sir Fat fingers 5/16 is what you need. Thanks

 

[Straightshooter1]

I just got a new chargemaster lite and was wanting to pick up that insert but cant recall were to purchase it.

Thanks, Joel

Here's what has been working well for me:

 

[gman47564]

when I was using a chargemaster I cut off the neck and about a half inch of a 243 case .. wrapped about 2 wraps of masking tape around the end of the dispencing tube and slid the cut off piece of case over the end of it and worked like a charm... hardly ever had a over throw with it...

 

[Steve Ladino]

I believe the poster is looking for the person who is a member here and has been selling them for quite a while now.

 

[Steve Ladino]

I just got a new chargemaster lite and was wanting to pick up that insert but cant recall were to purchase it.

Thanks, Joel

The person here is homeslice he advertises on the tools, dies, etc. forum