105 VLD's preferred seating depth? Anyone got some starting info? PRS gun so I'd rather not jam.
Last edited:
From working your way in the lands to out, try:105 VLD's preferred seating depth? Anyone got some starting info?
I'm pretty sure it's 104".What's your freebore?
How much for you adjust? .002?I test all bullets the same by start with a .010 jam and test working away from the lands. Rarely do I find myself jumping more than .020.
How much for you adjust? .002?
SAME for Me with, the Sierra 107 MK's "Tipped',.. Lite Jam, IS Best, in My 6 XC, 1-7. 5, .104 FB with, One grain under, Max Powder Chg. ( Found Max Pressure / Velocity at, .020 off,.. FIRST ! )The Berger 105 gr VLDs worked well in my 6BRX which had .120 free bore. The best accuracy was @ .005 to.007 jam.
You have to find what your rifle likes. BERGER VLD LOAD DEVELOPMENT INFO is here: https://bergerbullets.com/vld-making-shoot/#105 VLD's preferred seating depth? Anyone got some starting info? PRS gun so I'd rather not jam.
I just did a setting depth ladder on my 6bra with 105 VLD Fed 205m and N-140 started at 4ths jam and ended at 36ths OTL shot this wednesday wind was above 20mph bi-pod and rear bag see photo below hope this helps. These are all two shot groups at 100 yd.105 VLD's preferred seating depth? Anyone got some starting info? PRS gun so I'd rather not jam.
Thank you! Great shooting.I just did a setting depth ladder on my 6bra with 105 VLD Fed 205m and N-140 started at 4ths jam and ended at 36ths OTL shot this wednesday wind was above 20mph bi-pod and rear bag see photo below hope this helps. These are all two shot groups at 100 yd.View attachment 1416994
What twist rate are you using for Berger 105 Vld’s?My 6 BR prefers a 1.769 CBTO which is about .040 off of jam.
29.2 Gr Varge
105 Vld-Hunting
Peterson brass
CCI 400
Shot a 1 hole 3 shot group at 100 yards at this cbto with a velocity spread of 4 fps. At 300 yards the it shot a 1.31 inch 3 shot group, Theres some promise to this load.
7.5What twist rate are you using for Berger 105 Vld’s?