BR-2 primers vs Fed 210 Match

[double g]

Which one does most like for tight speed spreads.

 

[watercam]

I found them to be interchangeable in my long range match loads. Frankly I am getting best results with the Russian primers though. Lower ES and SD numbers with both large and small rifle Wolf/Tula.

 

[Chappy]

I found them to be interchangeable in my long range match loads. Frankly I am getting best results with the Russian primers though. Lower ES and SD numbers with both large and small rifle Wolf/Tula.

I'm in the same bracket, but I'm holding on to the few Wolf primers I have till they become more readily available.

Really, the differences I've noticed between 210M and BR-2 is the 210M is slightly hotter in my opinion but the BR-2 is a little bit harder in the cup and can allow you to run slightly higher pressures.

 

[loneranger04]

I buy either. Which ever I can find when I need them. I stay away from Winchester. I've had poor results from them.
I also read that the CCI 200 is the same primer as the BR2 with just more senior operators running the machines making them. I don't believe all I read but wouldn't hesitate using CCI 200s if that was all I could find.

 

[Sniper338]

It's a toss up for me, had great luck with both... Still havent been able to find russian primers locally to try with anything... so I stick with BR primers and federal match primers.