Boyds At-One stock

[Lkwebb]

Depends what you call full size, I'm 5'8" and 150, don't think I'm there yet. Looks like I'm going to be getting one.

Depending on how big around your barrel is you might have to do some sanding to get the barrel fully free floated.
I took a socket and wrapped sandpaper around it and worked it till my barrel was free from touching

 

[jpx2rk]

Depending on how big around your barrel is you might have to do some sanding to get the barrel fully free floated.
I took a socket and wrapped sandpaper around it and worked it till my barrel was free from touching

I had to do the same with my AT-1, originally ordered for a pencil weight 223 barrel and went to a 6x45 varmint contour, so it took some sanding to get things right but it shoots good with the new barrel and stock.

 

[Dgd6mm]

Where is a good place to purchase Boyd's stock?

 

[mike mccormick]

Where is a good place to purchase Boyd's stock?

Purchase direct on the net. Last stock I ordered from them was at my door in 7 days.

 

[MGYSGT]

Hard to figure who designed the sharp edges, especially at the pistol grip. Having said that, I took a dremel and removed the ones at the grip. Other than that I like it. Pic is setup on my last hunt for longer shots.

View attachment 1267374

Quite the rear rest. Cool

 

[hogpatrol]

Heads up on Boyd's, a friend ordered one of their short action Rem 700 Light Hunters direct from them, not a vendor, and got it in six days.