Bought a Ronny Milford style read bad and installed a Milford style rudder Levelling issues.

[Canuckienns]

I need some opinions on getting this set up tuned up. Just under 17 pounds light gun class. Not tracking very well pulls to the left, bur tracks back to almost zero. Will spend its whole life at 600 + yards.
Thank you.

 

[BoydAllen]

I need some opinions on getting this set up tuned up. Just under 17 pounds light gun class. Not tracking very well pulls to the left, bur tracks back to almost zero. Will spend its whole life at 600 + yards.
Thank you.

So are you saying that when you pull the rifle back and forth it tracks, but when it recoils as it is fired that it pulls to the left?

 

[6BRA]

Rear bag?

 

[SGT. Slaughter]

Milford makes quality stocks and accessories, why don't you give him a shout out. Or pm me and I'll give you his number.

 

[Brad Johnson]

I have one of Ronnie’s stocks and absolutely love it.

 

[Archer79]

Some sort of alignment issue...adjust the rudder and see if you can't get it to stop

 

[tom]

Videos | wheeleraccuracy

www.wheeleraccuracy.com

Scroll down to "adjusting your rudder"

Tom

 

[6BRA]

Videos | wheeleraccuracy

www.wheeleraccuracy.com

Scroll down to "adjusting your rudder"

Tom

What are you using for shims on the rudder? Nylon washers?

 

[tom]

What are you using for shims on the rudder? Nylon washers?

They're metal washers, I don't know the material. Alex was putting a little bag of various thickness with each stock. But nylon or mylar would all work.

Tom

 

[6BRA]

They're metal washers, I don't know the material. Alex was putting a little bag of various thickness with each stock. But nylon or mylar would all work.

Tom

Are these like .010 thickness or like .060 thickness. I may have to reach out to Alex. I've got the LRB..but no shims. Nylon washers would be on the thicker side. That's why I was asking.

 

[tom]

Are these like .010 thickness or like .060 thickness. I may have to reach out to Alex. I've got the LRB..but no shims. Nylon washers would be on the thicker side. That's why I was asking.

I think it was a 10,5,3 and a couple 1s. Or some arrangement like that. They never required much to get what we wanted.

Tom

 

[6BRA]

I think it was a 10,5,3 and a couple 1s. Or some arrangement like that. They never required much to get what we wanted.

Tom

Sounds like real thin shim stock. I will reach out to Alex. Thank you!