Borrow 6brx Go/ No Go Gauges

[StanwoodSpartan]

Does anyone have a set of PTG go/no go gauges for a BRX that I can borrow? Just got a new barrel in and want to give it a quick check before loading. I will pay shipping both ways. Thank you. PTG is WEEKS out go their Go Gauge.

 

[varget204]

Check with SSS,they have Manson Precision go gages $35,you can use paper,tape,shim stock .001--.002 on back of go gage for no go

 

[StanwoodSpartan]

Check with SSS,they have Manson Precision go gages $35,you can use paper,tape,shim stock .001--.002 on back of go gage for no go

Do you have a link? I'm not having any luck finding info.

 

[skiutah02]

I have a PTG go gauge that you can borrow but not a no-go. As indicated above I've just used paper/tape to fake the no-go. PM me if interested. Drew

 

[varget204]

Do you have a link? I'm not having any luck finding info.

Apologize,i hit wrong key,NSS,Northland Shooters Supply

 

[StanwoodSpartan]

I have a PTG go gauge that you can borrow but not a no-go. As indicated above I've just used paper/tape to fake the no-go. PM me if interested. Drew

Yes that would be awesome!! PM Sent

 

[Webster]

Does anyone have a set of PTG go/no go gauges for a BRX that I can borrow? Just got a new barrel in and want to give it a quick check before loading. I will pay shipping both ways. Thank you. PTG is WEEKS out go their Go Gauge.

Correct me if I am wrong. Assuming the gun smith cut the chamber a few thou to short or long. I own a 6BRX. If you can chamber a new 6BR case and you have to FF the shoulder .100" forward does it really need a GO or NG gauge? The case will FF to fit your chamber. I would think the FL die could adjust for any few thou deviation from some norm. If a NG gauge doesn't work you have a chamber a few thou shorter than a SAAMI spec. I could see a GO/NG gauge if you have to shoot factory loaded ammo but your FFing to your chamber. The cases match your chamber and not a number on a blue print.

 

[JEFFPPC]

Correct me if I am wrong. Assuming the gun smith cut the chamber a few thou to short or long. I own a 6BRX. If you can chamber a new 6BR case and you have to FF the shoulder .100" forward does it really need a GO or NG gauge? The case will FF to fit your chamber. I would think the FL die could adjust for any few thou deviation from some norm. If a NG gauge doesn't work you have a chamber a few thou longer than a SAAMI spec. I could see a GO/NG gauge if you have to shoot factory loaded ammo but your FFing to your chamber. The cases match your chamber and not a number on a blue print.

Webster you are correct. I have had close to 20 6brx barrels. Never had either gauge.