Bix vs Jewel

[WIB3]

Has anyone been able to get accurate data on comparing the Bix to the Jewel. Is it worth the extra $200 for the bix.

 

[WIB3]

This is a comparison in the heavy benchrest category. Thinking about trying one but don’t know if would be a waste of money. The Jewels I currently own are set below 2oz. Would there be any advantage in action timing.

 

[dogdude]

Walt, I've got a couple Bix's and 6 Jewells, you would not be wasting money on a Bix (Great trigger), but with the way your shooting I would Not change a thing!

 

[greisdor]

So why is a Bix better than a Jewel ?

 

[joshb]

So why is a Bix better than a Jewel ?

Because they cost more!

Sorry! I couldn’t help myself!
I have a bunch of guns with Jewels. I have a Bix in a box. I’ll report in when the build is done.

 

[greisdor]

Pos and cons - cost is a negative con. So far no pros !

 

[Tim s]

Well first off you need only to hold one in your hand or look inside one to realize.....very impressive.
When I got my first one, however, i got some serious technical information. The biggest factor to my mind is the fact that the force required to allow the sear bar to drop away and allow the striker to move forward requires 70% less force.
Seems to me that may yield improved ignition consistency.
Most jewels should be broken down and completely detailed to remove burrs and lastly you are done with wound springs that, when they fail, break right at the 90 deg bend leading to failure.....usually at inopportune times.

 

[ridgeway]

Jewel is not in same category as a Bix. So much more reliable and can run super light without slam fire.

 

[fultonbig9]

I had jewels on my guns always read and heard about bixs and how great they were so I bought one,then I instantly wanted another!!
Now , that’s what sits in both my guns. I know they are more money ,to me they are a difference you just have to use one. I could tell right off I was gonna like it. Hope that helped you.
Joey

 

[mike a]

What models are being compared here?

 

[WyleWD]

Has anyone been able to get accurate data on comparing the Bix to the Jewel. Is it worth the extra $200 for the bix.

Great question. Especially if you're after data like consistency of shot to shot weight of pull, creep, overtravel etc. I'm surprised that someone with reliable test equipment hasn't done a study on this.

I have both Bix and Jewells for BR. I like the Bix for the enclosed feature and seemingly consistent weight of pull. The price point on the Jewell is when it fails you can have a spare for the price of 1 Bix. JME, FWIW.WD

 

[Falfan2017]

The internals of a bix are oddly satisfying to see. Kind of like a nice mechanical watch everything fits together perfectly.

 

[dkhunt14]

Great question. Especially if you're after data like consistency of shot to shot weight of pull, creep, overtravel etc. I'm surprised that someone with reliable test equipment hasn't done a study on this.

I have both Bix and Jewells for BR. I like the Bix for the enclosed feature and seemingly consistent weight of pull. The price point on the Jewell is when it fails you can have a spare for the price of 1 Bix. JME, FWIW.WD

I believe I read a study on Benchrest Central about weight pulls of both. Maybe a search on there would show it. Matt

 

[WyleWD]

I believe I read a study on Benchrest Central about weight pulls of both. Maybe a search on there would show it. Matt

Thanks Matt. Looked there before I posted and couldn't find it. If you or anyone has a link to a well documented study on benchrest or aftermarket triggers in general, please post. It would help the OP (and everyone interested).WD

 

[Greyfox]

My experience with B&A triggers is that they are simpler to adjust, easier to clean & smoother than a Jewell. Also, blanking a primer doesn't result in a broken trigger. I have replaced all my Jewells with B&As. Something to consider, the horse that wins the Kentucky Derby isn't 100% faster than 2nd place, but it is worth considerable more, maybe more than 100%. As Snap On Tools used to say" the quality is still there long after the price has been forgotten."

 

[tom]

A Bix that isn't dicked up is definitely superior to anything I've had. And they both have reliability issues, as well as anything else mechanical.

Tom

 

[Raythemanroe]

I have read where Bix have broke


Ray

 

[Dusty Stevens]

I have read where Bix have broke


Ray

And i have seen a lot get abandoned lately. Its an expensive part to not use

 

[mikeeg02]

I have read where Bix have broke


Ray

It's happened to a friend of mine in a match we were at. He pulled the trigger and it didnt go off until either he released it, or he "bumped" the trigger the second time. At first he thought it was either a hang fire or he didnt put powder in, then when he released it, it went off. The second occurence it required a second tap. Back to back.

Another friend has had a similar occurence and worked with his gunsmith and they believe they have found a solution. I'm sure they will post up once its proven.

The other side is that several of my friends swear their rifles have shot better since they went from jewels to the bix.

 

[Chuckhunter]

It's happened to a friend of mine in a match we were at. He pulled the trigger and it didnt go off until either he released it, or he "bumped" the trigger the second time. At first he thought it was either a hang fire or he didnt put powder in, then when he released it, it went off. The second occurence it required a second tap. Back to back.

Another friend has had a similar occurence and worked with his gunsmith and they believe they have found a solution. I'm sure they will post up once its proven.

The other side is that several of my friends swear their rifles have shot better since they went from jewels to the bix.

Just curious Mike which trigger are you shooting? Inquiring minds want to know.