Bighorn Origin in Eliseo RTS chassis

[jrh84]

Wondering if anyone has used a Bighorn Origin action in an Eliseo action? I talked with Gary today, and he said was 99% sure he'd had a customer put one together, but wanted me to verify the tenon length, as the recoil disk location relative to the trigger and bolt is critical, obviously.
Putting together a .223 Palma/do everything rifle using this setup. Any other advice or watchouts would be welcome.

Thanks in advance!

 

[Twdmar]

I don't know on the tenon length but if it doesn't fit, it shouldn't really matter so much because you can for it in the action sleeve.
Does the origin have a side bolt release? I don't think the rts\r1 etc has a spot for a side release does it?
Zermatt should be able to tell you the tenon length.