Berger 200 hybrid MV

[kybountyhunter]

Switching from the Berger 185 Juggernauts to the 200 hybrid, in my F/TR rifle. Wondering what MV they like to be at for 300 to 1000 yards? Thanks for help!

 

[Marksman63]

Do you have enough throat? The 200Hs are very, very long... and like a 1/10 twist rate

 

[kybountyhunter]

Do you have enough throat? The 200Hs are very, very long... and like a 1/10 twist rate

I have 168 FB and a 10.5 twist.

 

[XTR]

See if you can get to 2650 without pressure. I think that is in the range of 42 to 43 grains of Varget. (assume this is an F-TR rifle and you have a 30+ barrel

 

[kybountyhunter]

See if you can get to 2650 without pressure. I think that is in the range of 42 to 43 grains of Varget. (assume this is an F-TR rifle and you have a 30+ barrel

It's a new Brux 27 1/2 long, only have 24 rounds down the pipe, with 43.4 of varget I got an average of 2568 of MV. I should get a little more speed after a 100 rds thru the barrel. I use lapua palma brass and Fed 205m primers. Was just wondering what MV most guys are getting with the 200 hybrid.

 

[savageshooter86]

I only could get 2575 with Varget. And I throated out specifically for this combo

 

[Marksman63]

I have 168 FB and a 10.5 twist.

I have 0.250"FB/1-10TR/32" and push it at 2780fps. QuickLoad says at 62kPSI, and I see no pressure signs