• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Bell and Carlson savage stock

I have one for the 4.4 screw spacing,varmint tactical,top bolt release,I bought It used and it’s setup with magazine,can I put a action that has the bottom bolt release in this stock?C3195854-385A-4436-B0A1-8B20936BCF4D.jpeg0FEFBF52-2B55-49C6-A28A-1526A809F64B.jpeg
 
From what I have seen on the site, they are not interchangeable, at least not without modification. I have tried to fit bottom release into a top release oriented stick Nd it did not fit.

Ave
 
The middle screw is under the bolt release on that second pic
I believe on a 4.4 spacing it will work but it looks like you will need to change the bottom metal to one that has that bottom bolt release built into it.
 
I have a couple different ones that take the magazine with the bottom bolt release.
There are a few different one that will do it I like the one I got from PT&G but there are others out there. the one that came with the rifle should work fine also
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,839
Messages
2,204,555
Members
79,157
Latest member
Bud1029
Back
Top