Beeson bolt extractor needed

[bcjolly]

New to forum. Extractor for my bench gun failed to extract empty cases during a match Saturday. The action is a 700 Remington using a Beeson cone bolt. Does anyone know where I can get a replacement extractor? Much obliged to all for their help.
Sincerely,
Barry C Jolly

 

[Hal]

bc

I would check over on the benchrest.com forum.

Hal

 

[jaclthr]

Hello Sir,

I'm not familiar with the Beeson type extractor but would the Kelby Cone Bolt extractor kit they sell work?

jaclthr

 

[bcjolly]

Checked with Kelbly--they said their's would not work. Thanks.

 

[bcjolly]

Here's what the bolt face & extractor look like.

 

[bcjolly]

A picture from the side.

 

[swd]

Have you had some one look at it? It might be as simple as cleaning up the edge and making sure the angle hasn't rounded over or gone positive. I have one of those bolts in an action so I'm familiar with it. I know it's preferable to find an extractor if possible but If you end up not being able to find one it's not the hardest part for some one to make or you could send it out and have the edge micro welded and refitted. Or the other option would be to send it out and put a Sako or AR type extractor in it.